LUCCA-english

This tutorial is written in PSP 10

   Materials:

   All materials are in the zipfile
   Extract the selections in your PSP selection folder
   Extract the gradient in your PSP gradient folder
   Extract the tubes in a folder of choise
   The filter DSB Flux here
   The Filter Unlimited2 (buyfilter)
   Alien Skin Eye Candy 5: Impact( demo) here
   The filter VM Toolbox her e
   The filter MuraMeister Copies her

   The preset Backlight => EyeCandy 5 Impact
   (Yoka-Lucca-BL1 in Zipfile)
   extract in your filterfolder => AlienSkinEyeCandy5 Impact
   =>Settings => Backlight

Annemarie, especially for this tutorial, wrote this gorgeous script,
    thank you so much Annemarie for this beautiful script :)
    The "gif" , needed for the script is also in this zip.
   The script=> here, Annemarie's site=> here



                  Preparation:



         Set your foregroundcolor to gradient Multi-Blauw and
         set your backgroundcolor to WHITE

         If you choose another gradient, do not use very light colors
         and choose a matching light and a dark shade, if you don't,
         you will experience some problems with the filter we use in point 69,



1.        Open a transparant: 500x400 pixels and floodfill your image
            with this gradient

2.        Effects - Filters Unlimited2 - Andrew's Filter 57 - Dotty Dotty
            use settings below:
         (if you use different colors, experiment a bit with the settings)



3.        Layers - new rasterlayer
4.        Selections - load - load from disk and find: Yoka-sel-Lucca1



5.       Floodfill the selection with the gradient and use settings below;



6.       Selections - select nothing

7.       Effects - Filters - VM Toolbox - Radial Mosaic with following settings



8.       Effects - Filters Unlimited2 - special effects 1- shiver =>



9.       Effects - distortion effecten - Spiky halo =>:



10.    Effects - 3d effects - dropshadow=>:



11.     Layers - new rasterlayer

12.   sSwap your material, make white your foreground colour



13.     Selections - load - load from disk and load Yoka-sel-Lucca2



14.     Floodfill the selection with WHITE => opacity => 34
15.     Selections - modify -contract=> 10 pixels
16.     Layers - new rasterlayer
17.     Floodfill the selection with WHITE => opacity=> 28
18.     KEEP SELECTED
19.     Effects - AlienSkinEyeCandy5- Impact - Backlight
           and find the preset: Yoka-Lucca-BL1



20      Selections - select nothing
21.     Effects - edge effects -enhance more
22.     Effects - edge effecten - enhance
23.     Layers- new rasterlayer
          Your foreground color still is WHITE



24.     Selections - load from disk - load; Yoka-sel-Lucca3



25.     Floodfill the selection with WHITE,=> opacity=> 34
26.     Selections - select nothing
27.     Effects - MuraMeister - Copies use settings below;



28.     Effects - edge effecten - enhance more
          opacity+> 36 and blendmode+> LUMINANCE
         (if you are using different colors, check out which blendmode you
         want to use, because if you use lighter colors, the results will differ)
29.     Layers - new rasterlayer
30.     Selections - load from disk and load: Yoka-sel-Lucca4



31.     Floodfill this selection also with WHITE and put the blend
           mode on SOFT LIGHT and
           opacity on 60
32.     Selectionss - select nothing
33.     Effects - image effects - seamless tiling using settings below:



34.     Effects - edge effects - enhance
35.     Layers - merge - merge visible
36.     Layers - new rasterlayer
37.     Brush tool: ( foregroundcolor is WHITE) and
           find the brush Yoka-brush-lucca-band using settings below:



           stamp the brush on your image=> as in example given :



38.     Effects - distortion effecten - warp =>use settings below;



39.     Set the opacity of this layer to 18 and the blendmode=> dodge
40.     Layers - new rasterlayer
41.     Brush tool:=> find the brush ; Yoka-brush-lucca2
         Size=> 232



          and stamp the brush on your image as example givene.
          Your foregroundcolor is WHITE



42.     Put the opacity of this layer on 40
43.     Effects - 3d effects - dropshadow=>;



44.     Layers - new rasterlayer
45.     Tool brush=> find the brush: Yoka-brush-lucca-circles



46.     Again, with WHITE, you stamp this on your image as example given;

45.

47.    Opacity=> 83 Blendmode=> DODGE

48.     Layers - new rasterlayer
49.     Selections - load from disk - load: Yoka-sel-Lucca5



50.     Set your foregroundcolor to a middle-tone/color
           matching your tube or background,


          I chose : #A8B6D7=> and floodfill the selection with this color
           blendnode=> BURN
51.     Layers - merge - mege visible
52.     Selections - modify - expant with 1 pixel
53.     Selections - modify - selection - select selection borders:



54.     Layers - new rasterlayer
55.     Set your foregroundcolor to WHITE
         Zoom in!!! (view - zoom - zoom in more)
56.     Floodfill the selection with WHITE, and check if the
           entire selection is filled!
57.     Selections - select nothing
58.     Effects - DSB Flux - lineair transmission using following settings:



59.     Repeat this once more!.
60.     Effects - edge effects - enhance more
61.     Effects - 3d effects - dropshadow with following settings



62.     Image - add borders - 1 pixel - use a light color from your image
         I chose: #7BCEF5
63.     Image - add borders - 20 pixels - use a dark color from your image
           I chose; #000029
64.     Image - add borders - 1 pixel - use a light color from your image
           Again I chose: #7BCEF5
65.     Set your foregroundcolor to gradient Multi-blauw:



66.     Image - add borders - 55 pixels - use a color at will
67.     Magic wand:=> put on INSIDE:(binnen=inside)



68.     Select the 55 pixel border and floodfill the selection with the gradient
69.     Effects - FiltersUnlimited2 - Special Effects 1 - Shiver =>
           using following settings:



          Keep selected!
70.    Effects - Textureffects - weave with settings below:
          You can fill in the color thread to your liking, one that will
           match your image



71.    Effects - edge effects - enhance
72.    Selectionss - select nothing

73.    Image - add borders - 1 pixel - use a light color from your image,
          I chose: #7BCEF5
74.    Image - add borders - 20 pixels - use a dark color from your image,
          I chose; #000029
75.    Image - add borders - 1 pixel - use a light color from your image,
          I chose: #7BCEF5

76.     Layers - new rasterlayer
77.     Selections - select - load from disk ; Yoka-sel-Lucca6



78.     Open the tube Yoka - doorgang ( if you are using differnt colors,
          you can colorize this tube of course)
79.     Edit - copy
80.     Edit - paste into selectionen =>
           blendmode MULTIPLY and DE-SELECT!

81.     Open the tube Yoksa-SemiMistedlady191006
82.     Edit - copy
83.     Edit - paste as new image
           and place the tube as in example given:



84.     Effects - 3d effects - dropshadow=>:



85.     Layers - merge - flatten
          You can save your work as a JPG and add your
          watermark if you want too

           BACKGROUND

1.       Open a transparant 200x200 pixels.
2.       Set your foreground to lineair gradient using settings below,



3.       Effects - Filter Unlimited2 - special effects - shiver=>
          horizontal=> 124 and vertical =>151
4.       Effects - edge effects - enhance
5.       Effects - image effects - seamless tiling:



         Save as JPG and fill out the script



          Would you mind writing a little something in my guestbook?

          Hugs - Yoka

Other results